6
••
X517 Rev 798 Monitor Rack-Mounting Kits
Assembling the Monitor Bezel to the Rack Mount
1. Locate the four threaded spacers on the front edges of the rack mount kit. Hold the front bezel so that the
holes in the bezel match the threaded spacers. If the spacers and the holes in the bezel do not match
exactly, it may be necessary to loosen the six screws attaching the side supports to the rack and
reposition the side supports slightly until the spacers and holes match. Retighten the six side support
screws.
2. Attach the bezel with the four black No. 6-32 x 1/4 inch screws. Do not fully tighten the four screws.
3. Check the bezel alignment and then tighten the bezel screws. Do not overtighten.
4. Complete all cable and power cord connections to the monitor. This completes installation.
Maintenance
The Vicon monitor rack mount kits require no scheduled maintenance. The front bezel may be dusted with a soft
cloth as needed.