B.3 Addressing X1300X-DVC and
Keypads
The configuration data provided in this manual for
The addresses for the
and -RVC keypads
and -RVC keypads applies to VPS1344
are set by programming the keypad via the front panel.
installations and supersedes the instruction manuals for
The decimal number and hexadecimal number (Table
individual keypads.
B-l) appear on the keypad display.
Refer
to
Instruction
Manual X777 to set the addresses for these keypads.
PGM
R U N
AUX
1 2 1 1 1 0 9 6 7 6 5 4 3 2
Figure B-3
Keypad Rear Panel
Figure B-4
Keypad
Address DIP Switch SW39
Shipping Instructions
Use the following procedure when returning a unit
t o
2. Attach a sheet of paper to the unit with the
following information:
the factory:
a.
1.
Call or write Vicon for a Return Authorization
(R.A.) at one of the locations listed below.
b.
cord the name of the Vicon employee who issued
the R.A.
C .
VICON INDUSTRIES INC.
525 Broad Hollow Rd.
Melville, NY 11747
516-293-2200 l-800-645-9116
d.
e.
For service or returns from countries in Europe,
contact
f.
Name and address of the company returning
the unit
Name of the Vicon employee who issued the
R.A.
R.A. number
Brief description of the installation
Complete description of the problem and
circumstances under which it occurs
Unit’s original date of purchase, if still under
warranty
VICON INDUSTRIES (U.K.) LTD
Brunel Way
PO15 5TX
3.
Pack the unit carefully. Use the original shipping
carton or its equivalent for maximum protection.
United Kingdom
Fax:
4. Mark the R.A. number on the outside of the
carton on the shipping label.
Copyright
1996 Vicon Industries Inc. All Rights Reserved.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
B-4
X779-396