Unpacking the VN-VIEWER-64PC
Carefully open the carton. Remove the Accessory Kit and the VN-VIEWER-64PC from the box and place
them on a large, flat working surface.
Required Items for Installation
To properly install the VN-VIEWER-64PC there must be simple hand tools available such as a screwdriver,
wrenches, pliers and wire cutters/strippers. To setup the VN-VIEWER-64PC for operation, there must be a
keyboard and a mouse available to operate the GUI.
Unit Components
This section describes the VN-VIEWER-64PC unit's front and rear panels.
Front Panel Controls and Connections
The following picture shows the VN-VIEWER-64PC front panel. Each panel component is described in the
table below.
The VN-VIEWER-64PC's front panel contains the following components:
•
Power Switch:
Used to power on the VN-VIEWER-64PC.
•
Power indicator:
Used to display the power status (ON means VN-VIEWER-64PC on and OFF means
VN-VIEWER-64PC off).
•
LAN indicator:
Used to display the actual network data activity.
•
CD-RW Drive:
Used as a high-capacity removable data drive.
•
Reset Switch:
Used to perform a hard reset of the VN-VIEWER-64PC.
•
USB Ports:
Used to support external USB devices, such as a disk-on-key.
2
•
XX193-20 Rev 1108 VN-VIEWER-64 Monitor Configuration
