Quick Guide
|
9
Make the following connections to the NVR:
Note
A mouse and keyboard are required for setup.
•
Position the monitor(s) in a permanent fixed location. Connect the
monitor to the appropriate connector, VGA, DVI or HDMI (a DVI-
VGA adapter can be used if required).
•
Insert one side of a standard LAN cable to the Network Port’s RJ-
45 connector. Insert the other RJ-45 connector into the LAN side
of the network.
•
Insert the connector of the provided power supply into the
NVR’s
power receptacle
.
Do not connect the remaining end to a
power receptacle until instructed.
•
Connect the monitor(s) to the power source and switch on.
To ensure that the NVR is protected during a power failure and that no
important data is lost, it must be connected to an uninterruptible power
source (UPS) before use.
•
Connect the NVR's power supply to the UPS power receptacle.
•
Connect the UPS power cord to the wall outlet.
•
Power on the UPS and ensure that it is working properly.
•
Power on the NVR.