Main Menu Configuration
16
200fps/PAL under Half D1 condition. If the user has set 4 channels with 30fps/NTSC, or 25fps/PAL,
the balance FPS is 120fps/NTSC (240 minus 30 x 4), or 100fps/PAL (200 minus 25 x 4). Therefore
the user can allocate these balance 120fps/NTSC, or 100fps/PAL to non-recording 12 channels for
network live video monitoring. (approx. 10fps per channel/NTSC, 8fps per channel/PAL)
If any extra FPS is not existing, the channels, having no allocated recording FPS by network, are
invisible. In this case, you can use JPEG streaming. For more details, please refer to
3.2.6. Recording Condition
This feature allows user to set the recording condition per each channel and the selectable values and operations
are as following;
• Manual : This is for manual recording function that you can use REC button on the remote unit, or on the front
panel of DVR to start, or to end the recording.
• Continuous : This is a continuous recording mode in any circumstances when the DVR system is powered on.
• Motion : This is recording mode only when there's a movement. Before movement, DVR records 24 frame
images (Pre-Alarm Recording) and after movement, DVR continues recording for a certain time (Post-Alarm
Recording). The Post-Alarm recording time period can be set by user on continuous recording time menu from
event setup menu. (
Section 3.3.4, “Post-Alarm Continuous Recording Time (Second)”
• Sensor : This function is to record the video only when Sensor input is available. Like Motion mode, it starts
to record 24 frames of video data from the Sensor event (Pre-alarm recording), and continues to record for a
certain time after Sensor event (Post-alarm recording). The Post-alarm recording time can be set up from the
event setup menu (Post-alarm recording time continuation time menu)
Section 3.3.4, “Post-Alarm Continuous
) Furthermore you can refer to
setup function.
• Motion + Sensor : The recording function operates only when the Motion or Sensor takes place. For more
details, please refer to Motion and Sensor description.
• Schedule : This is a scheduled recording for a week or for 24 hours. For more details, please refer to
information.
• Cont. + Event : To set up and to record continuous and event frames respectively.
3.2.6.1. Cont. + Event Recording
This is to enter the recording mode/setup for event taken place during continuous recording.
Summary of Contents for VDR-704C
