Vicon VDR-404, Installation And Operation Manual

Page: 42 / 146

41
4 & 8 & 16 Channel VDR Operation manual Revision 1.1
3.2.6 Record mode
User will choose recording mode channel by channel and selectable parameters and
meaning are below.
Manual: Manual recording function that starts record and/or stop recording manually by
pushing REC key on remote controller or on front key.
Continuous: Continuous recording mode that starts to recording automatically after turning
on the systems.
Motion: Start to record under motion detection. Under Motion, it starts pre-alarm recording
around 2 or 3 second and maintains it until no of motion event. Post-alarm recording will
be controlled at Post alarm recording time on Event Setup Menu. (Refer to paragraph
3.3.4)
Sensor: Start to record under sensor input. As same as motion mode, it starts pre alarm
recording around 2 or 3 second and maintain it until no of sensor input. Post-alarm
recording will be controlled at Post alarm recording time on Event Setup Menu. (Refer to
paragraph 3.3.4)
Motion + Sensor: Start to recording under motion detection or Sensor occurrence. The
detailed will be referred to previous motion detection & sensor occurrence.
Schedule: This mode supply user defined time and date schedule recording in advance
detailed recording schedule will be referred to paragraph 3.2.7 record schedule.
Cont. + Event : User can set the recording frame rate and the image quality differently
during Continuous condition and Event condition. This will give you the method to get the
high recording frame rate and the high image quality when the event happened. And It is
efficient using the hard disk space. The possible maximum frame rate is 480 fps (NTSC) /
400 fps (PAL).