Vicon VCR407, Installation & Operation Manual

Page: 8 / 40

4
Introduction
Note
A point to notice
Info.
Supplementary information
Controls and Functions (Cont.)
Fluorescent Display
(Counter Memory Stop/Month) indicator
Illuminates during the counter memory stop.
Also, illuminates when the month (of time and date) is being
entered via the front panel.
(Power Loss) indicator
Illuminates when the VCR is turned on after a power failure
occurs during recording.
(Alarm Recording) indicator
Flashes during alarm recording and stays on when the alarm
recording is finished.
(Time Date Search/Day) indicator
Illuminates during the time date search.
Also, illuminates when the day (of time and date) is being
entered via the front panel.
(Index Search) indicator
Flashes when recording an index signal and illuminates during
the index number setup and the index search. (Index number
is shown on the Recording and Playback Mode display.)
(Skip Search) indicator
Illuminates during the skip search.
(Daylight Saving Time) indicator
Illuminates when “DAYLIGHT SAVINGS” is set to “ON”.
, (Tape Speed) indicator
Indicates the tape speed.
SP is standard play; EP is extended play.
(Super Resolution) indicator
Illuminates during the recording, during the playback using a
tape recorded in Super Resolution mode and when a tape
recorded in Super Resolution mode is inserted to the VCR,
providing “SUPER RESOLUTION” in “RECORDING SET UP”
menu is set to “ON”.
(Repeat) indicator
Illuminates when “TAPE END” in “FIRST TIME SET UP” menu
is set to “REPEAT” or “ALARM•PROT”.
(Cassette Status) indicator
Illuminates when a tape is inserted.
(Timer Recording) indicator
Illuminates when the VCR is in stand-by for timer recording or
during timer recording.
(Tape Remaining) indicator
Indicates the position on the tape. S indicates the Start of the
tape and E indicates the End of the tape.
Counter/Clock display
While the VCR is turned on, indicates the relative position on
the tape. (The Counter stops counting where no recording is
made on the tape.) When it is off, (when set) the clock (24-
hour format) is shown.
Recording and Playback Mode/Index Number display
Displays the number corresponding to a selected recording or
playback mode. The mode shown here varies by the “TAPE
LENGTH” setting (T-120 or T-160) setting in “FIRST TIME SET
UP” menu. Also, displays the index number during the index
number setup and the index search.
(Emergency Recording) indicator
Illuminates when “EMERGENCY REC” in “RECORDING SET
UP” menu is set to “ON”.
Lock/Lock All indicator
: illuminates when all buttons (except REC button and
EJECT button) are locked.
: illuminates when all buttons are locked.
(Playback) indicator
Illuminates during playback.
(Recording) indicator
Illuminates during recording.