Quick User Guide
Network Camera
5. Web Browser Connection
Note: The Network camera supports Internet Explorer 7 or above.
Please check version of your browser and update it if necessary.
When you first access the camera you need to download and install an
Active X control from the camera to display a Live View image.
Default User and Password are set to “ADMIN” and “1234”. Please type in
the user ID and password to connect the network camera.
Note: By Default the cameras come with “Installation Mode” set to “ON” to
enable Analog output. Additionally, all installation setup must be done prior
to the camera being used with a VMS, including ViconNet; the VMS forces
the Installation Mode to OFF. You must turn Installation Mode to Off to use
720p or 1080p streaming.
For further information on setup, refer to User’s manual on the software CD.
