rI
r
Solid line denotes
area to be cut out.
Dashed line indicates
of mounting flange.
FRONT
Six mounting holes
0.187 in. (0.47 cm)
in diameter
Figure 2
Ceiling Cutout
3.
Insert the supplied grommets into the
appropriate
cutouts.
4.
Assemble and adjust camera and lens as described
in the camera/lens instruction manuals.
NOTE: Extend the camera lens fully when posi-
tioning the camera in the housing (shortest focusing
distance yields the greatestphysical extension). This
prevents interference between the lens and the hous-
ing window when the camera is in use.
5.
Mount the camera on the mounting bracket using a
screw and lockwasher.
6.
Lift the unit (housing on ceiling panel) up to the
ceiling. Position the unit in the ceiling and thread
the cables through the cable openings in the
housing.
7.
Connect the video and electrical cables and energize
the camera.
8 .
Assemble and position the installation gauge in the
housing. Tape the gauge to the ceiling to provide a
reference plane for lens positioning.
9. Observe the scene on a monitor and adjust the
camera mounting bracket for the desired viewing
angle. Use the gauge as a guide to lens position.
NOTE: For detailed information on camera con-
nections and adjustments, refer to the appropriate
camera instruction manual.
10. Check all hardware for tightness. Close and lock the
cover.
1 1 . Cover the adjustment slots on the sides of the hous-
ing with a piece of duct tape to protect the housing
from dust entry.
X568-893
Summary of Contents for V8612H
Page 6: ......
