Vicon V8612H Instructions For Installation And Operation Manual Download Page 1

 VICON

INSTRUCTIONS FOR
INSTALLATION AND OPERATION

NOTES

SHEET NO.

I

REV.

SEC.

S U P E R S E D E S   I N S T R U C T I O N

MANUAL 

X568 893 6

MODEL 

 TAMPERPROOF CEILING-MOUNTED HOUSING

1   INTRODUCTION

The following information covers the installation of the
V86 

 Tamperproof Ceiling-Mounted Housing.

ceiling panel options sold for the housing. Two models
are available: the 

 is a 

 ceiling panel

and 

 is an adjustable ceiling panel which

This equipment must be installed in conformance with

allows 360 degree position adjustment capability for

national, state, and local electrical codes.

the 

 housing.

The compact 

 provides an inconspicuous

means of concealing a small CCD video camera. It can
be mounted in most types of ceilings. The 
be installed in a suspended ceiling either by cutting an

appropriate hole in an existing tile or by using one of the

Provision is made for the attachment of 

 junction

box on the upper housing for electrical connections. The

 knock-out opening can also be used for cable

routing into the housing.

2. INSTALLATION

WARNING: 

Read ALL instructions 

A

 before installing this unit. Failure to

do so may result in costly installation mistakes
or personal injury to installers or other persons.

The 

 Housing can be installed easily in either

suspended or permanent ceilings. Refer to Figure 1 for

housing dimensions.

2.1 Ceiling Preparation

1.

Be sure that the area directly above the selected

2.

Video, sync, and power cables must be routed near

location is clear of obstacles (such as steel beams,

the housing opening.

headers, pipes, electrical wiring, etc.) which would
interfere with the mounting of the housing.

WARNING: TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Product specifications subject to 

 without notice.

 

 1993 Vicon Industries Inc. All rights reserved.

Vicon 

part 

number 

Vicon and its logo are registered trademarks of Vicon Industries Inc.

VICON INDUSTRIES INC. 525 BROAD 

HOLLOW 

ROAD, MELVILLE, N.Y. 11747 TEL: 516-293-2200

FAX: 516-293-2627

TOLL FREE: l-800-645-9116 

(OUTSIDE OF NEW YORK)

Reviews: