CAMERA ADJUSTMENT
<White Balance>
1) Auto(Auto White Balance)
: AWB mode (1800ºK ~10500ºK)
2) Push/Hold :
Push&Hold Mode.
¾
To find the Optimal setting for the current luminance environment in this mode,
set the direction towards a sheet of white paper and select Hold and press enter
button. If the environment changes, readjust it.
3) CRS Mode(Color Rolling Suppression) :
Decrease color rolling effect.
¾
This operation take some time about 10 seconds and user can stop this
operation by pressing enter button.
¾
When CRS Mode is on, color tone can be weak.
4) Outdoor
: Set color temperature to outdoor (6300ºK)
5) Indoor
: Set color temperature to indoor (3200ºK)
6) FL(Fluorescent Light) :
Set color temperature to fluorescent light fixed gain.
7) User(User Set White Balance) :
Adjust red or blue gain.
¾
R(R-GAIN):Adjust R-GAIN value (0-255)
¾
B(B-GAIN):Adjust B-GAIN value (0-255)
<Auto Exposure>
1) SHT(s)(Electronic Shutter) :
Select Shutter mode.
¾
Auto(1/60(1/50) ~ 1/100,000 Auto run, Manual 8 step from 1/60(1/50) ~1/10,000)
.
2) FLC(Flicker-less) :
Flicker-less On/Off.
3) AGC(Auto Gain Control) :
AGC Gain(Off, Low, Middle, High)
4) Sens-Up(Slow Shutter) :
Maximum Slow-Shutter select. (x2-x32 and Off)
5) Offset Add :
Force the picture to turn up at low luminance environment.
<BLC/WDR>
1) Normal AE :
BLC/WDR function off.
2) WDR(Wide Dynamic Range) :
Wide dynamic range mode on.
3) EHLC(Excessive High Light Compensation) :
EHLC mode on.
¾
excessive lighting compensation is performed when the weighting on the
high-brightness side is increased.
4) Auto(Auto Weighting BLC) :
Auto weighting BLC on.
5) Spot(User Setting BLC area) :
Spot metering mode on.
¾
Posi : OSD mode to adjust the position of the spot metering area.
¾
Size : OSD mode to adjust the size of the spot metering area.
6) Zone(Preset BLC area) :
Fixed metering area mode. (1-9).
<Mask>
1) Mask:
Select mask area(1-15).
2) Func
: Select mask function.(Privacy, BLM, Both, Off).
¾
Privacy : Area to screen on the display.
¾
BLM : Back Light Mask.
Selected BL Mask area that will be except of the auto exposure
If there is a light mounted high in a closed environment such as an
apartment parking garage or gas station entrance, removing the high
mounted light may make it possible to view car license plates clearly.
11
