Vicon V660B Series Installation And Operation Manual Download Page 22

Software supplied either separately or in hardware is furnished on an “As Is” basis. Vicon does not 
warrant that such software shall be error (bug) free. Software support via telephone, if provided at no 
cost, may be discontinued at any time without notice at Vicon’s sole discretion. Vicon reserves the 
right to make changes to its software in any of its products at any time and without notice. 

The Warranty and remedies provided above are exclusive and in lieu of all other express or implied 
warranties including, but not limited to, the implied warranties of merchantability or fitness for a 
particular purpose.  Certain jurisdictions do not allow the exclusion of implied warranties.  If laws 
under such jurisdictions apply, then all express and implied warranties are limited to the warranty 
period identified above.  Unless provided herein, any statements or representations made by any other 
person or firm are void. Except as provided in this written warranty and to the extent permitted by law, 
neither VIcon nor any affiliated shall be liable for any loss, (including loss of data and information), 
inconvenience, or damage, including, but not limited to, direct, special, incidental or consequential 
damages, resulting from the use or inability to use the Vicon product, whether resulting from breach 
of warranty or any other legal theory. Notwithstanding the foregoing, Vicon total liability for all claims 
under this warranty shall not exceed the price paid for the product. These limitations on potential 
liabilities have been an essential condition in setting the product. 

No one is authorized to assume any liability on behalf of the Company, or impose any obligations on it in 
connection with the sale of any Goods, other than that which is specified above. In no event will the Company 
be liable for indirect, special, incidental, consequential, or other damages, whether arising from interrupted 
equipment operation, loss of data, replacement of equipment or software, costs or repairs undertaken by the 
Purchaser, or other causes. 

This warranty applies to all sales made by the Company or its dealers and shall be governed by the laws of 
New York State without regard to its conflict of laws principles. This Warranty shall be enforceable against the 
Company only in the courts located in the State of New York.  

The form of this Warranty is effective August 1, 2015. 

THE TERMS OF THIS WARRANTY APPLY ONLY TO SALES MADE WHILE THIS WARRANTY IS IN 
EFFECT. THIS WARRANTY SHALL BE OF NO EFFECT IF AT THE TIME OF SALE A DIFFERENT 
WARRANTY IS POSTED ON THE COMPANY’S WEBSITE, WWW.VICON-SECURITY.COM
. IN THAT 
EVENT, THE TERMS OF THE POSTED WARRANTY SHALL APPLY EXCLUSIVELY. 

Vicon Part Number: 8006-9010-03-12   Rev 0815 

Summary of Contents for V660B Series
























Reviews: