manualshive.com logo in svg

Vicon V1008-WIR-180-1, Installation & Operation Manual

Share
Download
Vicon V1008-WIR-180-1 Installation & Operation Manual Download Page 59

53

V1008-WIR-180-1User Manual 

Chapter 2: Camera Configuration

Copyright © 2020 Vicon Industires Inc. All Rights Reserved.

Event - FTP Upload

FTP Upload Handler Configurations

Configures which type of event trigger to enable and the FTP server address 
that the camera will connect to. The options are: 

 

▪

Trigger Alarm Detection

 

▪

Trigger Motion Detection

 

▪

Trigger Sabotage Detection

 

▪

Trigger Scheduled 

Remote Server

Host Address

Specifies the host name or IP address of the FTP server.

Port

Specifies the port number of the FTP server.

Username

Specifies the login username for the FTP server.

Password

Specifies the login password for the FTP server.

Save

Save button applies the configurations. Click on this button once to confirm 
all the settings for the new changes to take effect.

Reset

 

Click the Reset button to discard all the settings and revert to the previous 
settings.

Summary of Contents for V1008-WIR-180-1







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands