60
V1000-WIR-360 User Manual
Chapter 2: Camera Configuration
Copyright © 2021 Vicon Industires Inc. All Rights Reserved.
Event - Video Analysis
Video Analysis Configurations
Enable
Enables or disables object detection function.
Detect mode
Configures the methods of object detection; the options are
Line Counting
,
Line Crossing
,
Area Counting
and
Intrusion
.
Line Counting:
To create a
Line Counting
area for calculation (no event
trigger), on the live video screen, select the area by holding down the mouse
button and draw the
Line Counting
lines; release the button once the
desired area is covered. Then select the
Two way
or
One way
option
(calculation method) from the
Direction
drop-down menu.
Line Crossing:
To create a
Line Crossing
area for triggering events, on the
live video screen, select the area by holding down the mouse button and
draw the
Line Crossing
lines; release the button once the desired area is
covered. Then select the
Two way
or
One way
option (trigger method)
from the
Direction
drop-down menu. (Note: Object detection function
must be enabled in the Network Storage menu to enable event triggers.)
Area Counting:
To create an
Area Counting
area for calculation (no event
trigger), on the live video screen, select the area by clicking the mouse button
to specify the first anchor point; then draw a line to place the second anchor
point. Continue to draw lines for the third and fourth anchor points; finish
off the selection by clicking the first anchor point. A total of 4 anchor points
can be created. Select the
Inside
or
Outside
option (calculation method)
from the
Direction
drop-down menu.
