Twisted-Pair Cable
CAUTION:
Careful selection of the proper cable is essential to obtain the best performance from this equipment. Vicon assumes
no responsibility for poor performance when cables other than those recommended are installed.
Materials
Use a pure copper stranded conductor with or without a tin plating to obtain a low DC resistance. Do not use cable with
either a steel or an aluminum stranded conductor because these do not transfer signals effectively for long distances. The
preferred insulation and cable jacket is Polyvinyl chloride (PVC). It has better electrical characteristics than polyethylene
and resists flames, sunlight and most solvents, but is more vulnerable to moisture.
Cable Types
The most commonly used cable types are dual individually-shielded, twisted pair in a single jacket. This configuration is
the most convenient for RS-422/ RS485 applications. Single twisted pair is also a suitable cable.
Choose a Belden cable type by referring to the characteristics and maximum distances listed below. The maximum
distance for the most reliable digital control refers to the distance between the CPU/Keypad and the Camera Dome
Assembly. The characteristics of the cables in the table should be used as a guideline when cables other than Belden are
used. Materials and construction must follow the guidelines above.
Recommended Individually-Shielded, Twisted-Pair Cable Types
CABLE
TYPE
WIRE SIZE
(AWG)
INSULATION
MATERIAL
JACKET
MATERIAL
DISTANCE ft (m)
max.
NUMBER OF
TWISTED PAIRS
Belden 9406
22
PVC
PVC
5000 (1500)
2
Belden 9402
20
PVC
PVC
5000 (1500)
2
Belden 8723
22
Polypropylene
PVC
8000 (2400)
2
Belden 8162
24
Datalene¹
PVC
15000 (4600)
2
Belden 9729
24
Datalene¹
PVC
15000 (4600)
2
Belden 9182
22
Datalene¹
PVC
25000 (7600)
1
¹
Datalene is a Registered Trademark of Belden.
Belden Inc.
http://www.belden.com/
(800) 235-3361
XX077-01-00 Rev 204 SVFT-MSH Maximum Security Housing
•
13
