Quick Guide
Programming
Note: Each procedure begins from the Surveyor2000 Program Menu. Use the autoiris key to return to the Program Menu.
For detailed instructions, see Surveyor2000 Programming Manual.
Programming Using the Menus
Minimum Required Connections
You must connect control, video and power to the dome in order to use a control device and monitor to view programming
screens. Refer to the Surveyor2000 Installation & Operation Manual for specific information on required connections.
Surveyor2000 camera dome systems have a built-in receiver which may be programmed by the user with one of
the Intelligent Remote Control Panel models.
Disabling Autofocus
Deflect joystick right/left
to select
Manual.
Move cursor to
Camera Controller.
Press the
autopan key.
Press the
autopan key.
The Surveyor2000 Program
Menu will display.
Move cursor down to
Focus Mode.
Accessing Programming Menus:
These steps display the initial programming menu
on the selected monitor.
Note: As described in the menus, use the control device's joystick or the autopan key to make a
menu selection. Use the autoiris button to exit the menu.
Select a monitor.
Select a camera.
Enter preset “94”.
Pan/Tilt Controller
Adjust max pan/tilt speeds and enable/disable the zoom scalable pan/tilt feature.
Camera Controller
Adjust autoiris, autofocus, shutter speed and V-phase.
Alarm Handling
Enable alarms and reports, define alarm status, acknowledgements, action on alarm and reset.
Relay Driver
Define relay states during active use and when power is applied.
Source Titling
Define alarm preset, camera and sector titles as well as title placement and layout.
Preset/Tour Handler
Program tours and presets.
Scheduler/Time of Day
Program time display format, daylight savings time and set time.
Menu Item
Used to...
Language
Set default language to English, Spanish, French or German (depending on firmware revision).
Install Defaults
Overwrite user's settings with factory defaults.
Visit our home page at: http://www.vicon-cctv.com
3
Note: Refer to V1300X-DVC and V1300X-RVC Intelligent Remote Control Panels Instruction Manual X777 and/or
V1400X-DVC System Console Instruction Manual X923 for operations, depending on the control device being used.
1
1
2
3
4
5
2
3
4
5
