Vicon SN118C, Installation Manual, Page: 20 / 45

Installation
|
2-13
Surveyor HD Network Dome XX214-00
5. With the ring concentric with the hole, slide the ring vertically along
the support slots to obtain the best flush fit in the ceiling. The ring
should be firmly seated against the tile without warping the tile.
6. Finally, complete the installation as described in the procedure of the
previous sub-sections. In this installation, the flippers will secure the
enclosure to the mounting ring assembly instead of the tile.
Pendant Mount Models
The indoor, outdoor and high-impact pendant models mount on a variety of
Vicon mounts or a 1.5-inch vertical pipe with an appropriate coupling. The
pipe is a standard 1.5-inch NPT type and must be oriented vertically so the
Surveyor HD can effectively hang from the pipe.
The accessory kit contains the removable terminal blocks for all connections
in this installation. The mount must provide a support of suitable strength for
the indoor pendant Surveyor HD weight of 4.2 lb (1.9 kg) or the outdoor/high-
impact pendant Surveyor HD weight of 7.2 lb (3.3 kg), which includes a
sunshield.
1. Install the mount in accordance with the installation manual included
with the mount or prepare the vertical 1.5-inch NPT pipe.
2. Feed all necessary cables through the back of the mount or out the
end of the 1.5-inch NPT pipe.
3. Unlatch and rotate the customer interface board 90º downward to
provide access to the terminal blocks. (The board can be completely