Vicon RV 4116, Operation And Maintenance Manual

Page: 120 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Net binder unit (electronic)
2
1
7
-2
0
8
-1
.f
m
ID
M
English
- 114 -
Part 6
4. Remove the split pin (B) , intro-
duce the pivot (C) in the SAFE-
TY POSITION, and then
introduce the split pin.
ID
M
-2
1
7
2
0
8
0
1
3
0
0
.p
d
f
C
C
B B
Working position Safety position
5. Perform the necessary opera-
tions.
To re-activate the cutting de-
vice at the end of the aforesaid
operations, remove the split pin
(B) , introduce the pivot (C) in
the WORKING POSITION, and
then introduce the split pin.
6. Close the cover (A) .
HOW TO CLEAN THE NET DRIVING ROLLERS
100
Follow the instructions.
ID
M
-2
1
7
2
0
8
0
1
0
0
1
.p
d
f
B E
E1
A
D
C
1. Make sure tractor PTO is dis-
engaged.
2. Stop the engine, apply the
parking brake and disengage
the ignition key.
Before performing operations
within the binder area, deacti-
vate the cutting device in order
to avert the dangers of shearing
to the upper limbs in case of ac-
cidental activation, and pay at-
tention to the cutting devices.
3. Open guards (A-B) .
4. Deactivate the cutting device
(See "How to deactivate and
activate the cutting device").
5. Lift the strap (C) .
6. Rotate the handle (D) .
7. Clean and remove product debris from the net driving rollers (E-E1) .
8. Spread a specific product (for example, talc) over the roller (E1) to prevent the de-
terioration of the surfaces and favour the detachment of the net.
Caution
Precaution
To prevent damages to the rubber roller , do not use sharp or cutting objects.
9. Close guards (A-B) .