V2000/V2100 User Guide
61
Event
When an event is triggered, OSD can be displayed on screen to highlight and inform user.
6.6
Events
As an intelligent device, the IP camera is capable of automatically detecting many events, such as
motion, tamper, network loss, alarm, etc., and taking actions to inform the user about these
occurrences. The Event Search section assists administrator to have detailed, systematic analysis on
each individual event with its type, counts and time.
Figure: Events
Basic Setting
Event list displays all events identified by the camera, with information including types, starting time,
and ending tim
e. Click on “Refresh” to get
the most updated list of events that are enabled for
detec
tion in Event Source. Click on “Clean Up” to clear this list.
Under Filter, select the type of events included and select either “All the time” or “Manual
,
” followed by
input of
time in “Start” and “End” time fields to define the time frame these types of events took place.
A list of counts of the entire types of events is displayed under Analysis on the lower right to give an
overview of how frequent each type of the event took place.
6.7
RS485
When connecting the camera with external RS485-based device, user is required to define related
parameters including “Baud Rate” and “Device Address
,
” both of which need to be compatible
between the camera and the connected device, for proper operation.
Figure: RS485 Settings
