96
Maintenance
Pick-up equipment
tines
The pick-up equipment tines are wear parts.
> Check the condition and completeness of the pick-up equipment
tines:
•
After every working day.
•
At the start of the cutting season.
> If necessary, replace bent or broken tines.
Lubricating the
pick-up equipment
drive chain
> Loosen the chain tensioner.
> Oil the chain.
> Tension the chain tensioner.
→
»Adjusting the pick-up equipment chain tension«, page 96
Adjusting the
pick-up equipment
chain tension
The chain tensioner for the pick-up equipment is located on the left-
hand side of the implement. The chain tension is adjusted as follows:
> Turn the nut until the spring reaches a length (E) of 140 mm.
Oil
E
Summary of Contents for RF 2235
Page 5: ...Inhaltsverzeichnis 5...