122
Eliminating malfunctions
Removing the
blockage
Step 1
Swivelling out the knife
> Switch off the tractor's PTO shaft.
> Swivel out the knives.
> Switch on the tractor's PTO shaft.
> Reduce the tractor's PTO shaft speed.
> Try to engage it again.
> Check whether the blockage has been cleared.
Step 2
Emptying the bale cham-
ber
If the blockage remains:
> Disengage the drive coupling
•
hydraulically or
•
manually.
> Empty the bale chamber when the bale is nearly formed.
> Check whether the blockage has been cleared.
Step 3
Manual reversing
If the blockage remains:
> Use with reversing wrench
→
Step 4
Using the PowerPush
system [+]
If the blockage remains:
> Use of the PowerPush system [+]
> Check whether the blockage has been cleared.
Step 5
Reversing the direction
of rotation
If the blockage remains:
> Reversal of the direction of rotation for the free-wheeling of the pro-
duction roller.
→
»Reversal of the direction of rotation«, page 125.
> Gradual turning of the production roller using the tractor's control
device.
Summary of Contents for RF 2235
Page 5: ...Inhaltsverzeichnis 5...