10
|
ViconNet Nucleus Installation and Configuration Guide
Operation
Powering On the Unit
To power on the system:
With the unit set up as shown in
Installation
, open the front panel cabinet and
press the front panel pushbutton Power Switch. The button does not lock into
position; it remains in the out position, which is its default position, even when
the system is running.
Important
Do not press any keyboard buttons at this time.
When the unit completes booting, the Main Screen is displayed.
Powering Off the Unit
To power off the system:
With the unit booted and operational, press the
Shutdown
button in the
Site
Setup
window. Follow the screen prompts and the system returns to the
ViconNet desktop. Use the
Start
button to completely shutdown the system.
OR (this is not recommended, due to the possibility of data loss)
Momentarily press the power switch. The system switches off, component by
component.
