3)
Network
– Click the Network tab to Review/Setup the Network properties of the KTX-4V2. Press
Apply to update the device. Please note – this will cause the device to reset and the process takes
approximately 1 min.
Figure 4-3: Network Configuration Screen
4)
Unit Configuration
– This tab shows the Unit Name and Time setting information. Press Apply to
update the device. Please note – this will cause the device to reset and the process takes
approximately 1 min.
Figure 4-4: Name and Time Configuration Screen
Note: Debug Level is used for system diagnostics and troubleshooting. For normal operation, Debug Level
should be set at 0.
XX172-00-00 Rev 206 KTX-4V2 Digital Video Server
Chapter 4 - Operation
•
15
