Vicon KRX-3V5, Installation & Operation Manual, Page: 22 / 39

Unit
The Unit tab allows you to change the following settings: Unit name, Nucleus IP address, IP address, Subnet
mask, Gateway, DNS, DHCP, and Debug level, on a scale of 0-4, where 4 is most debug information. Time
zone, Daylight saving time, Local time, Local date are not applicable for the KRX-3V5.
Note: Debug level should only be changed by direction of the Vicon’s Technical Services Team.
Note: Click Apply to save the changes.
Note: Verify all IP addressing parameters with your IT administrator.
Note: In order for the DHCP option to work properly, verify that the decoder does not expire the IP address
licensed to the decoder. (Decoder should always receive the same IP address from the DHCP decoder.)
14
•
Chapter 4 - Operation XX184-01-00 KRX-3 Video Decoder