86
•
Configuring the ViconNet System
XX185-30 Rev 807 Kollector Lite
Configuring Site Authorization
The ViconNet system enables you to define the site authorization for each group of users that you have
defined in the system. This consists of specifically defining which system operations can be accessed by
each group.
The system also provides the following two default groups:
•
ViconNet Administrator:
Users assigned to this group have authority to perform all system operations.
•
ViconNet Guest:
Users assigned to this group have authority only to log in, log out and exit the
ViconNet application. Default values shown in entry fields may also be changed, if required. All other
options are disabled.
When configuring site authorization, each group is displayed in its own column along with a list of available
system operations. This enables you to set site authorization for one or multiple groups by selecting the
appropriate options in each column.
To configure site authorization:
1. From the ViconNet
Main
window, click
. The
Setup Site Selection
window is displayed,
showing a list of all currently connected transmitters and Workstations, as shown on page 57.
2. Select your Kollector Lite and click
. The System Settings window is displayed, as shown on