manualshive.com logo in svg

Vicon KollectorLite XG, Software Manual

The Vicon KollectorLite XG is a top-notch surveillance system that guarantees seamless performance. Ensure a smooth setup and optimal operation by accessing the comprehensive "Installation & Operation Manual". Download this essential manual for free from our website and make the most of your Vicon KollectorLite XG experience.

Share
Download
background image

XX185-30 Rev 807 Kollector Lite 

Getting to Know ViconNet 

•

 29 

Display Mode Controls  

The ViconNet Display Mode Controls enable you to select and modify the number of video display locations 
that are displayed simultaneously in the 

Video Display

 area by clicking the required icon. In the display 

modes with more than one video display location, you can use all or only some of the locations to view, record 
and play back video, as required. 

For example, if you want to record video from seven cameras, you would select display mode 

Nine

 and have 

two blank video display locations and seven active ones. Refer to 

Chapter 6, Playing Back Recorded Video

, 

for detailed procedures for recording video.  

When performing viewing and playback operations, you can change the display mode during the operation 
without affecting the currently displayed video. Refer to 

Chapter 4, Viewing Live Video

, for detailed 

procedures for viewing and playing back video. 

The ViconNet system provides the following display modes, which enable you to select the number of 
cameras from which to view or record video in the 

Video Display

 area of the 

Main

 window: 

 

Display Mode 

Description 

 

Single:

 Enables you to view or record from one camera. 

 

Two-by-two matrix (Quad):

 Enables you to view or record from up to four cameras 

simultaneously. 

 

Hexa (Six):

 Enables you to view or record from up to six cameras simultaneously. 

 

Three-by-three matrix (Nine):

 Enables you to view or record from

 

up to nine cameras 

simultaneously. 

 

Four-by-four matrix (Sixteen):

 Enables you to view or record from up to sixteen cameras 

simultaneously. 

 

Full Screen: 

Enables you to 

maximize

 a selected video display location to fit the entire screen 

(including the 

Site List

). To restore the maximized screen to its previous size, click the   icon in 

the top right corner or right-click in the screen and click 

. You can also click 

<ESC>

. 

NOTES: 

The upper left video display location in all of the display modes is the default video display location for the 
first camera that you select for display in the 

Video Display

 area, unless otherwise allocated. 

Refer to Chapter 4, Viewing Live Video, Chapter 5, Recording Live Video and Chapter 6, Playing Back 
Recorded Video, for additional details about selecting cameras and video display locations. 

In addition, double-clicking a video display location in the 

Video Display

 area enlarges the selected location 

to full video display size, which is the same as the 

Single

 display mode, described on page 29. To return the 

Video Display

 area back to its previous display mode, double-click the full display again. 

TIP:

 The display mode can also be changed from the Navigator window, if required, as described in the 

Changing the Display Mode section, page 47. 

Summary of Contents for KollectorLite XG



























































































































































































































































































Reviews:

No comments

Related manuals for KollectorLite XG

Watcher E2 Series Manual preview
E2 Series
Brand: Watcher Pages: 14
Grandstream Networks GVR3552 Quick Installation Manual preview
GVR3552
Brand: Grandstream Networks Pages: 38
Uniden CAM250 Owner'S Manual preview
CAM250
Brand: Uniden Pages: 20
Dish Network Dish Player-DVR Quick Reference Manual preview
Dish Player-DVR
Brand: Dish Network Pages: 6
Navitel R385 GPS User Manual preview
R385 GPS
Brand: Navitel Pages: 77
COP-USA DVR2704TS-TVI User Manual preview
DVR2704TS-TVI
Brand: COP-USA Pages: 66
Security Labs Best Picture Quality - JPEG2000 User Manual preview
Best Picture Quality - JPEG2000
Brand: Security Labs Pages: 56
Samsung SHR-1010 Specifications preview
SHR-1010
Brand: Samsung Pages: 2
Samsung SDS-P5082 Brochure & Specs preview
SDS-P5082
Brand: Samsung Pages: 2
HIKVISION DS-7104HVI-SH User Manual preview
DS-7104HVI-SH
Brand: HIKVISION Pages: 158
Giantec 2000 User Manual preview
2000
Brand: Giantec Pages: 36
PI Manufacturing DVR-TVI-04 User Manual preview
DVR-TVI-04
Brand: PI Manufacturing Pages: 165
Abus HDCC900 2 Series User Manual preview
HDCC900 2 Series
Brand: Abus Pages: 54
Vicon Kollector Fore Installation & Operation Manual preview
Kollector Fore
Brand: Vicon Pages: 44
Vivotek ND8321 Quick Installation Manual preview
ND8321
Brand: Vivotek Pages: 11
Vivotek ND8321 User Manual preview
ND8321
Brand: Vivotek Pages: 184
Talos Security DRA SERIES User Manual preview
DRA SERIES
Brand: Talos Security Pages: 79
Talos Security H.264 Network DVR User Manual preview
H.264 Network DVR
Brand: Talos Security Pages: 86

Brands by name

Popular brands

Load more brands