* Note
Set the image quality value at greater than 90 when recording wide-view
images.
The camera noise may not be effectively eliminated if the the movement
sensitivity value is set at over 70, and when there's no movement, the images
might be intermittently recorded.
Continuous Mode
Stores all images regardless of changes in images captured on cameras. Regardless of
the sensitivity of movement selected, Kollector records all images captured on all
cameras without skipping. This mode takes up more storage space on HDD than when
using normal mode.
For maximum storage efficiency, please use normal mode for normal daily recording
operations.
Recording Time 1
Selects the recording time of images from the selected camera.
Example: When selected from 0 to 24 hour, the recording resumes continuously for 24
hours. When selected from 0 to 12 hour, images are recorded for the first 12 hours and
stops recording for the next 12 hours.
*Note
Whenever the installed sensor detects any motion under Sensor Enable mode,
recording resumes even during the off-recording time. Refer to the section on
Sensor for detailed instructions.
Recording Time 2
To select another recording time other than the recording time selected in
Recording
Time 1
, turn on the checkmark on the
Recording Time 2
and select the second time
frame.