7
12 Complete the Bullet Camera Installation
1. Attach the Housing Cover to the Camera Housing by sliding the two pieces
together as shown in Figure 12.1.
2. Replace the ¼” screw on the bottom of the assembly [Figure 12.2].
3. Attach sunshield if outdoors (or desired for asethetics) with (2) ¼” screws
[Figure 12.3].
13 PC Configuration of R5 Series
NOTE: The default user name for all IQeye devices is “root” and the default password is “system”.
IQeye cameras are configured for DHCP and will have an IP address assigned
if a DHCP server is on the network. If a DHCP server is not available, the camera
will self-assign an IP address using Automatic Private IP addressing. A static
IP address can be configured using either IQfinder or IQmanager.
1. Download and install IQfinder from the Vicon
website. Launch and scan for camera on the
newtork by clicking the refresh button. The
detected cameras will be displayed in the IQfinder
window. Select a camera from the list and click
“Assign IP” to edit the selected camera’s network
settings. Refer to Figure 13.1.
2. The “Assign IP” window allows the IP address,
Subnet, and Gateway of the camera to be changed
and alternatively the camera to be configured for
DHCP operation. Click the ”Apply” button after
making the desired changes (Figure 13.2).
NOTE: Changing between a static IP address and DHCP will cause
the camera to reboot.
Figure 12.1
Figure 12.2
Figure 12.3
Figure 13.1
Figure 13.2
