9
11 Complete the Dome Camera Installation
1. Attach the tether from the dome trim ring to the tether mounting point in the
enclosure as shown in Figure 11.1.
2. Rotate the black shroud inside the dome trim ring cover so it aligns with the
camera position.
3. Place the supplied desiccant pack inside the dome as shown in Figure 11.2 to
prevent fogging due to moisture that is present when installing the camera.
Use the supplied cable tie to keep the desiccant from falling down into the
dome bubble.
4. Attach the dome trim ring cover with shroud to the enclosure by tightening the
three tamper-proof screws with the supplied Torx T-20 security wrench.
12 PC Configuration of Alliance-mx
NOTE: The default user name for all IQeye devices is “root” and the default password is “system.”
IQeye cameras are configured for DHCP and will have an IP address assigned if
a DHCP server is on the network. If a DHCP server is not available, the camera
will self-assign an IP address using Automatic Private IP addressing. A static IP
address can be configured using either IQfinder or IQmanager.
Figure 11.1
Figure 11.2
