G.
Connect PoE input to the power unit. Connect a short Ethernet cable between the PoE
output and the Ethernet port on the camera. If using the media converter, connect the
wires to the 12V output on the PSU unit.
H.
Connect the day/night signal lines from the IR unit to the relay connectors on the
camera's terminal block. The day/night mode relay connection enables the
synchronization of IR light and the automated day/night switching mechanism on the
camera.
I.
Having the wiring done inside the enclosure, you can install the enclosure bracket to a
preferred location at your installation site. Drill mounting holes and a cable routing hole (if
preferred) on a wall. Install the bracket.
J.
Lift the whole enclosure up to the installation position, and pass the Ethernet cable
through the bracket.
PoE IN from
external
PoE OUT to
12V DCOUT
12V power to the
4
