4
|
ViconNet Nucleus Installation and Configuration Guide
Hardware Installation
This system should only be installed by a qualified technician using common
hand tools and approved materials in accordance with the National Electrical
Code ANSI/NFPA 70, state and local wiring codes.
The rack-mount model, VNUC-PCV8-RK is a 1 RU unit; the VNUC-PCV8 is a
ITX mini chassis (desk-top unit). These units meet requirements for an FCC
Class A computing device and CE
Vicon requires the use of line conditioners, voltage regulators and
uninterruptible power supply (UPS) systems in the electrical power service.
Note
Read all instructions before beginning the installation.
Accessory Kit
The provided accessory kit contains necessary items needed to install and
wire the unit during installation:
Table 1: Accessory Kit
Part
Description
CD and Manuals
Provides documentation and software (including current
drivers)
Front Door Key
Opens the front panel door
Power Cord
Used for power connection
Rail Bracket Kit
For rack mounting the VNUC-PCV8-RK