7
CAUTION:
TOO MUCH SALT CAN CAUSE EXCESSIVE
BOILING, BLOWN FUSE OR TRIPPED CIRCUIT BREAKER.
NOTE:
Do not
add salt to your vaporizer each time you operate the product.
Salt will build up over time and you may not need to repeat the
process. Before adding salt operate your vaporizer following steps 1-4.
If vaporizer does not produce steam after 15 minutes gradually add
salt following the above directions.
8.
USE FRESH WATER AND OPTIONAL MEDICATION
each time vaporizer
is used.
9.
AFTER EACH USE.
Once the vaporizer has been allowed to cool, unplug
and empty any unused water from the water container. Shake the
container gently back and forth to remove any remaining water. Rinse the
container thoroughly, drain and wipe with a dry, clean cloth.
NOTE:
All medicinal ingredients in Vicks
®
VapoSteam
®
are released in use,
leaving only the mineral oil base in medication cup. This should be
emptied and cleaned with a piece of cotton.
IMPORTANT:
To maintain proper operation of your vaporizer, be sure to follow
the Care and Cleaning instructions.
SPECIAL NOTES
Discoloration/Black Particles
After use, the water residue in the bottom of the container may contain black
particles, and, in some areas the water and the bottom of container may
discolor. These conditions are normal and do not effect the purity of the steam
or medicine. The container is easily cleaned with soap and water. Rinse and
dry the container after cleaning.
Ventilation
When vaporizer is used in closed or small rooms, check periodically for proper
ventilation, as excessive humidity can cause condensation stains on walls.
WARNING: KEEP OUT OF REACH OF CHILDREN.
Carefully
supervise children when the vaporizer is operating, especially
infants and toddlers. Vaporizers produce hot steam that can cause
serious burns.
Condition of Sale
As a condition of sale, the purchaser assumes responsibility for the proper
care and use of this appliance in accordance with our printed instructions.
