30
INSTRUCTIONS
Please follow the instructions below in order to use the appliance.
►
DEVICE PRE-HEAT
In order to achieve the appropriate taste of coffee it is important every time
before its making to preheat both the device and the steel mesh you are about
to use but also the cup in which you are about to serve the coffee. To do that
follow these steps:
1. Make sure that all switches of the appliance are in position “O”, the steam
control knob (6) is in position “OFF” and the appliance is disconnected
from the power supply.
2. Fill the water tank (7) making sure that it does not get over the “MAX”
indication and place the tank on the back of the device. To make sure that
it has attached properly, if it is needed, press it slightly down. Do not worry
if you see some drips of water on its base, this is normal, you can wipe
them off.
3. Place one of the two stainless steel meshes (15 or 16) in the metal funnel
of the funnel handle (13) and secure it properly onto the machine.
Do not
place any coffee in the mesh in this step.
4. Place one or two cups on the removable shelf (12) just underneath the
mouthpiece(s) of the steel filter you used.
5. Connect the device to the power supply.
6. Press the ON/OFF switch of the device to its “I” position. The orange light
will switch on.
7. Press the coffee/hot water (2) switch to its “I” position. As soon as water
begins to flow press it immediately back to its “O” position.
8. After some seconds the green light (5) will switch on. Press again the
coffee / hot water switch (2) to its “I” position and hot water will begin
flowing. Turn the same switch back to its “O” position when you see either
your cup filled with water or the green light (5) switched off. The machine
is now ready to make coffee.