Creating a new you!
MAINTENANCE OF YOUR VIBRATRIM
A properly maintained VibraTrim will perform better, last longer and even save in unnecessary repair costs. These are just a few reasons why
you should take care of your new purchase. The following maintenance list provides some suggestions that should be followed to help
maintain your VibraTrim.
Proper maintenance should always begin with a cursory check of the overall external condition of your VibraTrim before using it. A simple
walk-around will take less than a minute to perform.
Tighten all the screws on the VibraTrim unit every two months.
Check the power cord for any fraying or open wires.
Wipe off the VibraTrim with a soft dry cloth after each use. Do not use any kind of solvent.
Pull out the power plug when the VibraTrim is not in use.
TROUBLESHOOTING YOUR VIBRATRIM
Problem
Confirmation
Solution
The on light is not lit.
Check the power plug is inserted into the
electrical outlet
Insert the power plug in to the electrical outlet
The on light is not lit.
Check to see of the switch at the back of the
machine is off.
Turn the switch on.
The on light is not lit.
Check the POWER button has been pressed.
Press the POWER button on the control panel
or on the remote
Considerable shake of the unit
Please check that the machine is level.
Make sure that the unit I level and all the
feet have equal contact with the floor.
Some Noise occurs inside the unit
Check to see if all the visible screws are tight.
Tighten all of the screws with a screwdriver.
The machine makes a loud noise
Determine where the noise is coming from
Call the VibraTrim customer support.
The power does not turn on
Check the Power status of the remote
If the battery is okay, contact the VibraTrim
customer support.
The VibraTrim is not standing flat.
The machine wobbles.
Adjust the 4 feet under the base until the
VibraTrim is level.
Page 12