manualshive.com logo in svg

Vibration Research Corporation VibrationVIEW, Manual, Page: 306 / 333

Share
Download
Vibration Research Corporation VibrationVIEW Manual Download Page 306

VibrationVIEW Help

293

© 1995-2005 Vibration Research Corporation.  All rights reserved.

10.3

Test Tab

Test Tab

This is displayed at the very bottom of the screen, and shows all tests opened during that session.  It
provides a way to quickly switch between tests.

The tabs are cleared upon exiting 

VibrationVIEW.

10.4

Title Bar

Title Bar

The title bar is located along the top of a window.  It contains the name of the application and current
document.

To move the window, drag the title bar.  Note: You can also move dialog boxes by dragging their title
bars.

A title bar may contain the following elements:

·

Application Control-menu

·

Document Control-menu

·

Maximize button

·

Minimize button

·

Name of the application

·

Name of the document

·

Restore button

10.5

Toolbar

Toolbar

The toolbar is displayed across the top of the application window, below the menu bar.  The toolbar
provides quick mouse access to many tools used in 

VibrationVIEW

,

To hide or display the Toolbar, select the 

View..Toolbar

 menu command (ALT, V, T).

Click: To:

122

Summary of Contents for VibrationVIEW














































































































































































































































































































































Reviews:

No comments