manualshive.com logo in svg

Vibration Research Corporation VibrationVIEW, Manual, Page: 135 / 333

Share
Download
Vibration Research Corporation VibrationVIEW Manual Download Page 135

Menu commands

122

© 1995-2005 Vibration Research Corporation.  All rights reserved.

Remove Annotation
Move Annotation

Shortcuts

Keys:

Insert
F8
Shift-Insert

Insert annotation at the nearest peak

Ctrl-Insert

Insert annotation at the nearest valley

3.7.14 Move Annotation

Move Annotation command (

Cursor menu

)

Use this command to change the position of the currently selected annotation.  First click on the
annotation text (a black rectangle will briefly encircle the text), and then use this command to start the
move.  Move the mouse pointer to the desired location for the annotation, and click the left mouse
button to complete the move.

Tip: You can also move an annotation by pointing to the annotation text with the mouse, clicking the left
mouse button, holding that button down while moving the mouse cursor to the desired location and
releasing the button to complete the move.

See Also:

Add Annotation
Remove Annotation

Shortcuts

Mouse:

Click and drag the annotation

Keys:

F4

3.7.15 Remove Annotation

Remove Annotation command (

Cursor menu

)

Use this command to remove the currently selected annotation.  First click on the annotation (a black
rectangle will briefly encircle the text) and then use this command to remove the annotation.

See Also:

Add Annotation
Move Annotation

Shortcuts

Keys:

Delete
F7

3.7.16 Remove All Annotations

Remove All Annotations command (

Cursor menu

)

This command will remove ALL annotations on the currently active graph.

3.8

View menu

3.8.1

Toolbar

Toolbar command (

View menu

)

122

122

121

122

121

122

Summary of Contents for VibrationVIEW














































































































































































































































































































































Reviews:

No comments