manualshive.com logo in svg

Vibration Research Corporation VibrationVIEW, Manual, Page: 198 / 333

Share
Download
Vibration Research Corporation VibrationVIEW Manual Download Page 198

VibrationVIEW Help

185

© 1995-2005 Vibration Research Corporation.  All rights reserved.

2.

Set the sampling rate, number of header lines, the column number for the acceleration data, and
the acceleration units used in the file.

3.

Click the "Import Text File" button to copy the contents of the file into the user-defined waveform
buffer.  The program will switch to the 

Pulse tab

. Select User-defined pulse type, and the graph

will show the imported waveform.

Note that the User-defined shock pulse feature is an optional feature and requires the software key be
programmed to enable it.

4.4.8

Breakpoints tab

Shock Define Breakpoints tab

Clicking the "Breakpoints" tab on the 

Test..Edit Test Settings

 dialog box accesses this dialog box.

171

110

Summary of Contents for VibrationVIEW














































































































































































































































































































































Reviews:

No comments