Vibration Research Corporation VibrationVIEW, Manual

Page: 116 / 333

VibrationVIEW Help 103
© 1995-2005 Vibration Research Corporation. All rights reserved.
or don't want the server visible on the standard port. If the port number is not 80, then you will have to
include the port number when typing the web server address in your web browser. For example, if you
set the port number to 10000, then in your web browser you would have to enter the address
'http://
VibrationVIEW :10000'
After you enter all the fields and click "Apply" you can test your connection by clicking on the blue
http://name label. This will launch your default browser on your machine and, if all is configured
properly, display the Web interface. This is also the address you use on any remote machines to
access this machine remotely.
Check the box labeled "Log accesses to file:" and specify a log file if you need debugging information.
The logfile will contain a log of all the remote access attempts.
3.3.8 Parameters
Parameters command ( Configuration menu )
This command opens the Parameters tab on the VibrationVIEW Configuration dialog box.
Use this dialog box to configure the software.
This dialog box is used to set the Sample Rate, Window length and Window function used in
synchronizede Frequency and Displacement defaults apply whenever the system check mode is
started. Typically these defaults would only be changed if the controlled equipment is not capable of