8.3 Setting up Limit Values by Inputting Values (cont.)
8
Opening the value input screen
Press the Zero/Tare key.
Follow the same procedure as in “Step
2.”
9
Setting the upper-limit value
Follow the same procedure as described
for the lower-limit value and enter the
upper-limit value.
10 Saving the upper-limit value
Press the Memory key.
After saving the upper-limit value, the
balance displays it briefly and terminates
setup.
M
g
M
g
M
g
M
g
☆
Key Points of the Procedure
☆
1.
The limit values you have set can be checked each time you press the Set key.
The balance displays the lower-limit value after showing [
], and the upper-limit value
after showing [
].
長押し
Upper-limit value
displayed
Lower-limit value
displayed
Measurement mode
restored
Continuous pressing
g
M
g
M
g
2.
If you make a mistake, press the Function key during the setup of actual quantities or the
Set key during the setup of values.
3.
If you press the Memory key while a value is flashing, an actual quantity will be set based on the
weight currently loaded on the balance. Pressing the Zero/Tare key at this time displays the
value input screen.
4.
If the [
] mark lights up for all three judgement indicators, HI, OK, and LO, the lower-limit value set
exceeds the upper-limit value. Check the values, since mistakes can occur with entries, as in
cases when the upper-limit value is specified with a negative sign.
5.
When the [M] mark is flashing on the value input screen, the sign on the left end can be changed.
Press the Zero/Tare key to switch between the positive and negative signs.
26
Summary of Contents for SJ-1200E
Page 2: ......
