Vibra AJ-CESeries, Operation Manual

Page: 12 / 46

9
3.2 Operation Check
1 Turning on the power
*
When the balance has the AC
adapter connected, it displays [
＊
].
Pressing the On/Off key
The display section lights up, and
the balance is ready for operation.
2 Checking the display Check to see if the display has any
missing indications or unlit parts.
A few seconds after startup, the
indication is reset to zero.
（
When lock switch is set on
）
 
After every segment lights,
If something is loaded, the display
does not change [
 
] In this
case, remove the load.
3 Switching the measurement mode
Press the Function key.
Each time the key is pressed, the
unit of measurement changes, as
indicated.
※
The balance is shipped from the
factory with the following switching
sequence: [
g
]
→
[ct]
→
[Pcs]
→
[%]
→
[
g
]
→
· · ·
4 Verifying changes in the read-out indicator
 g
 g
Press the measurement pan lightly
and make sure that the read-out
indicator changes.
Also, ensure that the read-out
indicator is reset to zero when you
release your hand.
Pcs
  %
 g
 