ASSEMBLY INSTRUCTIONS
1
1
. The head of the Light can turn as shown by the
arrows.
2
. The light is switched on and off by means of an
optical sensor mounted in the top of the head, by
giving it a quick tap. See detail 1a.
The brightness of the light is set by keeping the
optical sensor covered until the desired brightness
is achieved. See detail 1b.
Increase the brightness of the light (MAX.) by
keeping the sensor covered.
If it is pressed again the light is dimmed (MIN.).
For the sensor to work properly it should be kept
clean.
2
1a)
1b)
Maintenance
-Use a slightly-wet cotton cloth for cleaning.
-In case of malfunction or damage, please contact the retailer who sold the lamp.