Maintenance
-Use a slightly-wet cotton cloth for cleaning.
-In case of malfunction or damage, please contact the retailer who sold the lamp.
ASSEMBLY INSTRUCTIONS
1
3
The lamp´s counterweight is supplied totally
unassembled. Follow the below-mentioned steps to
assemble it properly.
IMPORTANT
: During the whole operation the lamp
must be horizontal otherwise it is impossible to
install the counterweight. Protect the areas where
the lamp touches the floor so as to prevent any
damage.
1.
Unfasten the screw nut (A) to remove the bottom
plaque (B).
2.
Insert the counterweight (C) through the rod (D)
and replace the bottom plaque (B).Tighten the screw
nut (A) making sure the plaque is well centred.
3.
To install and maintain the bulb unfasten the three
screws (E) and remove the ring (F) and the glass
(G).Install the bulb and replace the ring and the
glass.
2
E
F
G
D
C
B
B
DETAIL
PACKING PROTECTORS
IMPORTANT NOTICE:
Caution: to avoid possible electrical shock,
make certain electricity is shut off at main
panel before wiring.
CAUTION : This portable luminaire has a polarized
plug (one blade is wider than the other) as a feature
to reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never use
with an extension cord unless plug can be fully
inserted. Do not alter the plug.
“WARNING: To reduce the risk of FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS”:
1. Turn off/unplug and allow to cool before replacing
bulb (lamp).
2. Bulb (lamp) gets HOT quickly! Only contact
switch/plug when turning on.
3. Do not touch hot lens, guard, or enclosure.
4. Do not remain in light if skin feels warm.
5. Do not look directly at lighted lamp.
6. Keep lamp away from materials that may burn.
7. Do not touch the bulb (lamp) at any time. Use a
soft cloth. Oil from skin may damage bulb (lamp).
8. Do not operate luminary with a missing or
damaged guard or lamp containment barrier.
