background image

In order to protect your purchase and aid your
warranty please fill in the following form and
keep it safe for your future reference:

Model Number:

Serial Number:

Purchased From:

Date of Purchase:

KEEP

 IT SAFE

Staple your receipt here:

Limited Warranty

All VIBE products carry a full twelve months manufacturers warranty, valid from

the date of the original receipt / proof of purchase. In order to

validate this warranty, the warranty card should be returned to VIBE

within seven days of the original purchase date. The original receipt

and packaging  should also be retained for this twelve month period. 

If at any stage during the warranty period you have a problem with the

product then it should be returned to the point of purchase, with proof of purchase in its

original packaging, complete with no items missing. 

If the store is unable to fix the product it may have to be returned to

VIBE this process takes around 7 working days.

A full description of VIBE's warranty information can be found on our

website:

www.vibeaudio.co.uk/warranty

A written version can also be obtained from

VIBE warranty Dept

PO BOX 11000

B75 7WG

Technical enquires 

call  09067 031420

call cost 50p per minute

call costs correct at date of publication (01/01/09)

Hours of business 9.00am - 5.30pm

all calls are recorded for training purposes

MIDBASS Distribution

PO Box 11000

B75 7WG 

Summary of Contents for SLICK s10











Reviews: