Congratulations on purchasing your SEK speakers, please read this manual in
order to fully understand how to get the best results from your speakers and
ensure that all advice on how to look after your speakers is followed.
Thank you for buying VIBE, we hope you enjoy listening to your product as
much as we enjoyed creating it. (VIBE R&D Division)
OWNERS MANUAL
Model: SEK10, 50, 60 & 69
Introduction
This instruction manual is for your safety and must be adhered to at all times. Please read and ensure that you fully understand the
installation and set up procedures as explained and if you are unclear on the installation or set up of your VIBE SE-K Series speakers
please contact your nearest authorised VIBE dealer.
Contents
WARNING
DO NOT EXPOSE THIS PRODUCT TO DAMP OR MOISTURE - doing so may result in fire, shock or damage to the product.
BEFORE WIRING DISCONNECT THE CABLE FROM THE POSITIVE BATTERY TERMINAL - failure to do so may result in electric shock or
injury.
ENSURE GOOD AND CORRECT CONNECTIONS - failure to make the correct connections may result in fire or damage to the product.
DO NOT USE FUNCTIONS OF THIS EQUIPMENT THAT MAY TAKE YOUR CONCENTRATION AWAY FROM DRIVING YOUR VEHICLE - do
not set up your amplifier whilst driving, doing so may result in an accident. For prolonged setting up, make sure that your vehicle is sta-
tionary and in a safe location.
KEEP THE VOLUME AT A LEVEL SO YOU CAN STILL HEAR OUTSIDE NOISE - failure to do this may result in an accident. VIBE equip-
ment is capable of producing sound levels that can permanently damage your hearing. VIBE recommends caution when listening at
high volume. For safe and enjoyable listening the sound should be comfortable and clear without distortion.
CAUTION
Never connect any speaker lead to the car chassis. This can cause severe damage to your speaker /car radio /amplifier.
Before drilling or cutting any holes, investigate the layout of your vehicle thoroughly.
Use caution when working near the fuel / hydraulic lines and electrical wiring.
Observe the correct polarity when wiring, improper phasing may cause a loss of bass response.
Ensure that no moving parts catch on the speaker or grill (e.g. window or door handles, or window glass inside the door)
Installation
The quality of the installation will affect the system performance and reliability.
Contact your nearest authorised VIBE dealer if you are unsure on the installation of this product.
Please mount this unit away from any potential hazards.
Minimising the length of wires will provide higher audio output from the system.
The speaker should be securely fastened to the mounting position using the screws provided.
Pre drill your mounting holes using a drill and position with the template provided.
Be sure to investigate your mounting area thoroughly for electrical wires, brake or fuel lines or fuel tank to prevent causing any dam-
age.
Firstly make sure that the speakers will fit in your chosen location. This may involve the removal of the standard vehicle speakers.
Please use the mounting depth and hole cut dimensions as detailed in this manual for guidance.
Woofer installation
. - SEK 50 / 60 /69
If necessary cut any material away to allow the speaker to sit correctly.
Cut out the mounting hole and pre-drill any other fixing holes.
If the grill is to be fitted, place it over the speaker and screw through both grill and speaker using the screw provided until the speaker
is securely fastened.
If no grill is fitted then securely screw the speaker into place using the screws provided.
SE-K series speakers
SEK10
SEK50
SEK60
SEK69
Tweeters and mounting pods.
Y
Y
Y
N
SE-K crossover units.
Y
Y
Y
N
Grills.
N/A
Y
Y
Y
Fixing screws.
Y
Y
Y
Y
Cut out template.
Y
Y
Y
Y
Lengths of speaker cable.
Y
Y
Y
Y