The CriticalLink™ range of FLAT series cabling from VIBE
The VIBE CriticalLink range of cabling has been developed to achieve the critical link between source, amplifier and speakers – VIBE audio equipment is
high quality, using anything less than the VIBE CriticalLink™ range of cables will severely compromise your equipment and will not allow it to perform to its
maximum potential.
NOTE: Your audio equipment will only ever be as good as the cables you use to connect it. The link between your audio equipment is critical for a bigger
cleaner sound.
VIBE cabling and interconnects can enhance your system power and sound quality by more than 20% over other brand cable.
FLATSTEREO™ High Definition full range Interconnect
The VIBE FLATSTEREO RCA is an OFC high definition full range interconnect – delivering the fullest signal possible from source to
amplifier - the cable make up has been developed to run flat with left and right cables running parallel both with individual screening but
sharing an outer FLAT jacket easing installations.
Available in:
Model: FlatStereo RCA 1m – 1 metre full range interconnect
Model: FlatStereo RCA 5m - 5 metre full range interconnect
FLATBASS™ – SolidCore™ Bass interconnect
The VIBE FLATBASS™ interconnect has been specifically developed for use in BASS SYSTEMS - the cable make up has a unique super
FLAT™ design easing installation - Its trick ingredient is oversized SolidCore™ OFC signal wires - allowing a heavier voltage to be passed
down the cable. This is the central wire that caries the main signal from source to amplifier.
Available in:
Model: FlatBass RCA 1m – 1 metre BASS interconnect
Model: FlatBass RCA 5m - 5 metre BASS interconnect
FLATFLEX™ High Definition speaker cable
The delivery of power and signal to the speaker is the final CriticalLink™ in any audio system – VIBES FlatFlex OFC high definition
speaker cable is produced from super fine OFC copper strands collectively picking up all the detail in your music – the multi strands
are aligned in a row making the cable super FLAT™ which can be run invisibly under carpets.
Available in:
Model: FlatFlex 16 SPK – 16 gauge High definition flat flexible speaker cable
Model: FlatFlex 12 SPK – 12 gauge High definition flat flexible speaker cable
FLATLINES™ Power and Ground Cable
VIBE FlatLines™ power cable has been developed to maximises voltage transfer from battery to amplifier - The cable has 2 main lines
running side by side which are made up of fine copper strands - This design makes the cable flat allowing us to make very slim heavy duty
power cable which is highly flexible easing installation.
Available in: system kits, by the roll or by the metre
Model: FLATLINES 8 PWR – 8gauge red power cable Model: FLATLINES 8 GND – 8gauge black power cable
Model: FLATLINES 4 PWR – 4gauge red power cable Model: FLATLINES 4 PWR – 4gauge red power cable
Model: FLATLINES 0 PWR – 0gauge red power cable Model: FLATLINES 0 GND – 0gauge black power cable
BASS SYSTEM KIT
The VIBE 3000watt BASS KIT is specifically designed to gain maximum output from high power Bass systems. Featuring the best BASS specific
cables from the VIBE CriticalLink™ Range.
Contents of this Kit:
FLATLINES™ 4AWG PWR Power and Ground cable
FLAT Heavy Duty 4gauge power cable developed to maximises voltage transfer from battery to amplifier - highly flexible easing installation. All cable
is terminated with crimped terminal rings. 5m Power. 1m Ground
FLATBASS™ RCA SolidCore™ Interconnect
specifically developed for use in BASS SYSTEMS – featuring oversized SolidCore™ OFC signal wire - allowing a heavier voltage to be passed down
the cable. 5 metre
FLATBASS™ 13 SPK Bass speaker cable
specially developed for BASS applications – Uses SolidCores™ that can handle and sustain considerably more power than conventional speaker
cable. 3 meters
FLATLINES ™ remote 18
With a current rating of 14 amps this cable can easily handle TURN ON of multiple amplifiers. 5 metres
VIBE 140 amp circuit breaker
The VIBE circuit breaker is rated at a massive 140 amps and offers critical protection to your system – if the system over powers or short circuits
the breaker will cut in and save your equipment.
All cable is terminated with crimped terminal rings in place and accessory fitting kit
COMPATIBILITY
This kit is compatible with the majority of amplifiers on the market – VIBE recommends this kit for all VIBE BASS monoblock amplifiers new, current
and old models.
Model: Bass Kit – Bass specific amplifier wiring kit
STEREO SYSTEM KIT
The VIBE 1500 watt STEREO KIT is specifically designed to gain maximum output from high power full range systems. Combining the best full
range cables from the VIBE CriticalLink ™ range.
Contents of this Kit:
FLATLINES™ 8AWG PWR Power and Ground cable
FLAT 8 gauge power cable developed to maximises voltage transfer from battery to amplifier - highly flexible easing installation. All cable is
terminated with crimped terminal rings. 5m Power. 1m Ground
VIBE FLATSTEREO™ RCA - OFC high definition full range interconnect
The VIBE FLATSTEREO RCA is an OFC high definition full range interconnect – delivering the fullest signal possible from source to amplifier - the
cable make up has been developed to run flat with left and right cables running parallel both with individual screening but sharing an outer
FLAT jacket easing installation
FLATLINES ™ remote 18
With a current rating of 14 amps this cable can easily handle TURN ON of multiple amplifiers.
FLATSTEREO™ speaker cable
OFC high definition speaker cable is produced from super fine OFC copper strands.
AGU Fuse Holder
Water proof Fuse holder located 12” approx from battery – holds glass type AGU fuses and offers reliable system protection. (Pre-wired onto
Power cable)
All cable is terminated with crimped terminal rings in place and accessory fitting kit
COMPATIBILITY
This kit is compatible with the majority of amplifiers on the market – VIBE recommends this kit for all VIBE full range STEREO amplifiers new,
current and old models. FLATLINES™ 8 PWR Power
Model: Stereo Kit – full range stereo amplifier wiring kit
ACTIVE SYSTEM KIT
The VIBE 1500watt ACTIVE BASS KIT is specifically designed to gain maximum output from high power Active Bass systems (Bass Boxes).
Featuring BASS specific components from the VIBE CriticalLink™ range.
Contents of this Kit:
FLATLINES™ 8AWG PWR Power and Ground cable
FLAT 8gauge power cable developed to maximise voltage transfer from battery to amplifier - highly flexible easing installation. All cable is
terminated with crimped terminal rings. 5m Power. 1m Ground
FLATBASS™ RCA SolidCore™ Interconnect
specifically developed for use in BASS SYSTEMS – featuring oversized SolidCore™ OFC signal wire - allowing a heavier voltage to be passed down
the cable. 5 metre
FLATLINES ™ remote 18
With a current rating of 14 amps this cable can easily handle TURN ON of multiple amplifiers. 5 metres
AGU Fuse Holder
Water proof Fuse holder located 12” approx from battery – holds glass type AGU fuses and offers reliable system protection. (Pre-wired onto
Power cable)
FastPlug™
Allows fast and safe removal of active bass enclosures via a specially made moulded robust plug – enclosure can be removed or replaced at any
time without removing any wires.
COMPATIBILITY
This kit is compatible with the majority of amplifiers on the market – VIBE recommends this kit for all VIBE active bass enclosures new, current and
old models.
Model: Active Kit – Bass specific active enclosure wiring kit
