4
Pairing with a Bluetooth phone:
Pairing occurs when two Bluetooth devices
communicate with each other and establish a stable connection. Once you pair a
device with the Vibe-Tribe® headset, you should not have to pair it again in the
future:
1. Power off the headset, and enable Bluetooth on your phone.
2. Press Main Button for 5 seconds; you will hear the voice feedback
“Power On”
followed by
“Pairing” and the LED indicator will flash blue and red alternately.
3. Follow the guide of your phone to search Bluetooth. Generally, you need to go to
‘Setup’, 'Connect', or ‘Bluetooth’ menu on your mobile phone, and select the option
to search Bluetooth devices.
4.
Vibe-Tribe®
headset “Vibe-Tribe Whisper” will be found. Select it and confirm the
choice when required by your phone..
5. If requested by your phone, enter the PIN code “0000” (4 zeros). When the
indicator flashes blue twice, the headset is connected with mobile phone
successfully; you will also hear the voice feedback “
Connected
”.
Connection with a second Bluetooth phone:
Vibe-Tribe® Whisper supports
Multipoint connection with two mobile phones simultaneously. Once Whisper is
paired to a first phone (see previous paragraph):
1. Power off Whisper headset.
2. Re-do the steps in “Pairing with a Bluetooth phone” section to connect with the
second mobile phone.
3. Go into the first mobile phone’s menu, Bluetooth section, and select “Vibe-Tribe
Whisper” to connect again with it.
Whisper will be now connected to both your phones. We suggest you to connect your
main phone per second since the last phone to be paired will benefit of automatic
reconnection and advanced commands.
Note:
Wireless devices may take a couple of tries to communicate the first time.
If your device does not connect within 90 seconds, repeat the necessary steps.
GETTING STARTED
CONNECTING BLUETOOTH
®
POWER ON/OFF:
Press the Main Button for 3 seconds, the LED
indicator of the headset will flash blue for 1 second, followed by
the voice feedback “Power On”. Press the Main Button for 2
seconds, the LED indicator of the headset will flash red for 1
second, followed by the voice feedback “Power Off”.
VOLUME CONTROL:
Press to increase the volume
level and the Volume- to decrease it.
BATTERY LED:
When the LED indicator flashes red in standby
mode or when you hear the voice feedback “Battery Low”, it
indicates that the headset is in low battery; please charge the
headset. During charge, the indicator of the headset will become
red; when the battery is full, the indicator of the headset will
become blue.
2
1
5
3
4
6
2
1
4
6
5
3
Main Button
Led Indicator
Micro-USB Port
Volume-
Microphone
Summary of Contents for Whisper
Page 1: ......
