07
www.viavito.com
R
Before You Begin
Before beginning assembly, carefully
read the following information and
instructions:
• Assembly requires two persons.
• Because of its size, the boxing stand
should be assembled in the location
where it will be used. Make sure that
there is enough room to walk around the
boxing stand as you assemble it.
• Place all parts in a cleared area and
remove the packing materials. Do not
dispose of the packing materials until
assembly is completed.
• Tighten all parts as you assemble them,
unless instructed to do otherwise.
• As you assemble the boxing stand, make
sure all parts are oriented as shown in
the drawings.
• For help identifying small parts, use the
PART IDENTIFICATION CHART on page 6.
Assembly requires the following tools
(not included):
- 2 adjustable wrenches
- 1 rubber mallet
- 1 standard screwdriver
- 1 Phillips screwdriver
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not
use power tools.
