Viavi Xgig1000, Hardware Manual

Page: 156 / 172

Appendix A Accessories for the Xgig1000 System
Analog Passthrough Adapters
Page 140 Xgig1000 Hardware Guide March 2017
Connecting the Analog Passthrough Adapters
When using the APT adapters, follow these steps:
1 Secure the bracket to the chassis.
Figure 30 Analog Passthrough Adapter Shelf/Bracket
a Remove the screws on each side of the chassis that corresponds to the side
screw locations on the bracket.
b Slide the bracket onto the front of the chassis.
c Align the bracket and reinsert the screws through the bracket into the locations
on the chassis that the screws were removed from. See
Figure 32 .
d Tight the screws to 5 inch-pounds.
2 Insert the adapter(s) into the adjacent ports on the chassis. See Figure 31 .
– For the 4-port chassis, use ports 1-2 or 3-4.
– For the 8-port and 10-port chassis, use SFP ports 1-2, 3-4, 5-6, or 7-8.
– For the 10-port chassis, use the two QSFP ports.
Figure 31 Ports on Xgig1000 25G/32G & Xgig1000 25G/32G/50G/100G/128G Chassis