Viavi Xgig, User Manual

Page: 140 / 468

Chapter 4, Xgig TraceControl Capture Configuration Capture and Trigger Setup
126 Xgig Analyzer User’s Guide
Multi-State Triggering
Multi-state or Advanced triggering is only available and shown in the Trigger Mode drop-down
for 6G SAS/SATA, 12G SAS, or PCIe ports. All ports in a domain must be 6G SAS/SATA, 12G
SAS, or PCIe in order to use Advanced triggering.
Using Advanced Triggering, you can create complex configurations with multiple levels. You can
create states and define capture filters and transitions including rollbacks, triggers, or transitions to
other states.
When the Advanced trigger mode is selected, the Overview pane shows a single state and its
transition. For Advanced triggering mode, you can define up to 16 states, including the trigger, for
6G SAS/SATA and 12G SAS and up to eight states, including the trigger, for PCIe.
To add a state to the configuration, follow these steps.
1 Click the state’s transition bubble.
2
In the Actions pane, click .
The Go To dialog appears.
3 Type a name in the state field.
4
Click OK.