Chapter 3
Testing
Assessing WiFi performance throughout a site
WiFi Advisor Wireless LAN Analyzer User’s Guide
Page 44
22073751, Rev. 003
September 2015
Step 4: Specifying the AP and Station Location
These settings specify the room where each WiFi Advisor is located.
To specify the AP and Station location
1
From the Site Assessment page, select
AP Location
.
2
Select the room where the Access Point is located. If the location you desire is not listed, select
Add Location
.
3
From the Site Assessment page, select
Station Location
.
4
Select the room where the Station is located. If the location you desire is not listed, select
Add Location
.
Assessing an installation site
Two-ended site assessment uses two WiFi Advisors to test connectivity and assess an installation site. The following procedure
describes how to assess an installation site.
To assess an installation site
1
Bring an iPad and two WiFi Advisors to the site.
2
Open the WiFi Advisor application on the iPad.
3
Select
Two-Ended Site Assessment
.
The Settings page appears.
4
If needed, specify the settings as described in
5
Select
Start Test...
to initiate the Site Assessment test.
